Skip to content

AI plan review for plan checkers and building officials

Plan checkers and building officials use AI Plan Checker to start every review from a consistent first pass. Completeness is confirmed at intake, findings arrive with code sections and locations on the sheet, and the reviewer accepts or declines each one before anything goes to the applicant.

What AI Plan Checker does for municipalities

  • Start from a first pass

    Open a set with the routine checks already done and the findings pinned to the sheets.

  • Decide, don't hunt

    Spend time confirming and interpreting findings instead of measuring corridors.

  • Consistent comments

    Findings cite the same sections the same way, whoever does the review.

  • Faster resubmittal review

    Compare a resubmitted set to the last one and see what was resolved.

Example

Multifamily submittal at intake

A 24-unit submittal arrives at the counter and AI Plan Checker runs before it enters the review queue.

  1. Soils report not included in the submittal

    ✕ ViolationChecklist

  2. Rear setback is 12 ft; 15 ft required in this zone

    ✕ ViolationZoning: setbacks

  3. Required exits and exit access travel distance comply

    ✓ CompliesIBC §1017.2

The applicant is told about the missing report at intake, and the plan checker starts the review with the setback finding ready to confirm.

Part of Municipal Plan Review

For city and county building and planning departments

AI Plan Checker gives city and county building and planning departments a consistent first pass on every submittal. It confirms the set is complete, checks it against your adopted zoning and building codes, and gives plan checkers a list of findings with code sections and locations on the sheet. Your reviewers make every decision.

Explore municipal plan review

Questions from municipalities

Do reviewers have to accept every finding?

No. Reviewers accept or decline each finding, and only their decisions go to the applicant.

Can we try it before committing?

Yes. Departments typically start with a pilot on recent submittals, run alongside their normal review.

Give every submittal the same first pass.